A deck can collect years of dirt, mould, algae and grime, particularly in shaded or damp areas. Cleaning it properly takes more than running a pressure washer over the boards.
At Kleanfreaks, we clean timber using a combination of suitable cleaning methods , thorough brushing and controlled low-pressure washing. For weathered timber, we can also apply a brightening treatment to improve its appearance and help prepare it for re-staining.
The method depends on the timber species, its condition and any existing coating. We clean timber decks, stairs, handrails, balustrades, fences and cedar exteriors across Auckland.
Request a Deck Cleaning Estimate
High pressure can leave lines in the boards, raise the grain or damage softer and weathered timber. It can also affect loose or deteriorating coatings. The aim is to remove the dirt, not the timber underneath it.
We rely on the cleaning solution and brush work to loosen and remove much of the buildup, then rinse using low pressure and technique suited to the surface. That gives us more control over the finish, especially around older decks, exposed board edges and softer timbers such as vitex, kwila and cedar.
For decks that need a more thorough clean, we use the following process. Light maintenance cleaning may not require every stage.
We first check the timber, its condition and any existing oils or coatings.
For suitable timber, we commonly use a sodium percarbonate-based cleaner mixed with warm water and applied across the boards.
It is generally left to work for around 15 minutes, subject to the product and conditions, while keeping the surface damp. This helps loosen dirt, mould, algae and accumulated grime.
We scrub the deck with an appropriate specialised brush head to lift stubborn grime and organic growth.
This is a major part of the cleaning process, rather than relying on water pressure to do all the work. More delicate areas are treated with additional care.
We carefully rinse the timber, working along the boards and adjusting the pressure, nozzle distance and technique to suit the surface. The goal is an even clean without cutting into the timber or leaving visible pressure marks.
We also rinse away the cleaning solution and loosened debris.
On weathered timber, we may follow with a separate oxalic acid-based brightening treatment.
This can help reduce greying and certain discolouration, even out the timber's appearance and reduce residual alkalinity from the earlier cleaning stage.
The timber is then thoroughly rinsed with clean water. Whether this stage is suitable depends on the timber and its existing finish.
We work with common exterior timbers including Kwila, Vitex, Tigerwood, treated pine and cedar, as well as other hardwood and softwood decks.
Hardwoods and softer timbers do not all respond the same way to cleaning solutions or water pressure.
An older deck with weathered boards may need more care than one receiving regular maintenance. We assess the timber before choosing the cleaning method rather than putting every deck through the same treatment.
If you are planning to oil or re-stain your deck, cleaning is an important preparation step.
Dirt, mould, loose surface material and chemical residues can interfere with the finish if they are left behind.
Our cleaning and brightening process can help prepare suitable timber for coating. However, cleaning is not the same as stripping old coatings or sanding damaged timber.
Decks with failing paint, varnish, heavy coating buildup or badly raised grain may need extra preparation by the coating contractor. The timber must also dry sufficiently before any oil or stain is applied.
We also clean timber steps, balustrades, handrails, screens, fences, pergolas and other exterior timber areas.
If several of these areas need attention, we can include them in the same estimate.
Cedar house cladding needs particular care. We assess its condition and existing finish before selecting a method, especially when the timber is being prepared for re-staining. We do not treat cedar cladding as though it were concrete or standard painted weatherboard.
A thorough clean can make a noticeable difference to timber affected by dirt, mould and surface grime.
Brightening can also help with some weathering-related discolouration.
There are limits, though. Cleaning will not repair damaged boards, remove every deep stain or reverse all UV weathering.
Previous oils, paints and stains can also affect the final appearance. We explain any obvious limitations before carrying out the work.
The cost depends on the deck's size, timber type, condition, access and what is included.
A straightforward maintenance clean is different from a multi-stage restoration clean involving balustrades, stairs or preparation for staining.
For an estimate, send us your property address and a few clear photos. It also helps to know whether the deck is being cleaned for general maintenance or before oiling or re-staining.
If your deck is looking dark, slippery or covered in mould and grime, get in touch.
We can look over the timber, explain what cleaning is suitable and provide pricing for the work.
Request a Quote | 0800 114 589